The Hardwire kit for the GL300 GPS tracker allows you to connect it directly to an external power source. This will eliminate the hassle of recharging batteries, making this a very low friction, low maintenance, way to install the GL300 in a semi-permanent state.

What's in the box

• Mini USB Plug
• Mini USB to USB-C Adapter
• Voltage Converter
• Chassis Negative (Ground Lead)
• Positive Lead
• Inline Fuse

Installation

1. To install the GL300 Series Hardwire Kit, begin by identifying the red positive lead 
   on the Hardwire Kit. This is the lead that will connect to the power source in your 
   vehicle. Please consult your vehicle owner’s guide to identify. These power sources 
   may vary based on vehicle make and model, so it is very important to consult your 
   vehicle’s documentation.
2. Once you identify the power source, you will then need to select an appropriate 
   ground for the Hardwire Kit. Attach the black ground lead to this ground. Please 
   consult your vehicle owner’s manual to correctly identify a ground near your 
   preferred power source.
3. Once the positive lead and ground lead are connected, attach the USB-C adapter 
   to your GL300 series tracker, and attach the mini USB plug to the adapter. This will 
   power the unit and keep the tracker’s internal battery charged. (If you are using 
   an older GL300 tracker, you may connect the mini USB plug directly to the tracker 
   without the adapter.)
4. Once the positive and ground leads and the mini USB and adapter have been 
   attached, place the tracker in the wired location. The 5.7 ft (1.7 m) kits power 
   cable allows you to position the tracker away from the Hardwire Kit. The voltage 
   converter must also fit in the desired location, so please ensure that there is room 
   for the entire kit. Secure the kit and tracker in place with adhesive foam or an 
   alternate adhesive.

Important Facts

• Some vehicular power sources are tied to the ignition of the vehicle, while others 
  may power your tracking device even when your vehicle is turned off. Please keep 
  this in mind when choosing your power source.
• Please contact your car-care professional for installation if you are unfamiliar with 
  installing vehicular electrical components
• This kit is designed for use with Spytec GPS GL300 series trackers only. It has not 
  been tested for use with other trackers.
• Tuck away colored cables, as they are not needed.

Specifications

Help

Thank you for purchasing a Spytec GPS product. We appreciate your business and strive to make your experience the best possible. If you have any issues with your product, contact us at the following addresses:

Email tech support questions to: support@gethapn.com

Email billing questions to: support@gethapn.com

To download user manuals—including the one for the Hapn platform software that you’ll use to track your GPS device from a phone, tablet or computer, go to:

https://help.gethapn.com

Log into your tracker at: app.gethapn.com

To download the IOS app go to: store.apple.com/hapn

To download the Android app go to: store.google.com/hapn

Warranty

The Spytec GPS 6-month hardware warranty covers products purchased online or from an authorized retailer. Products under warranty qualify for an exchange with a valid receipt and an active subscription and is non-transferable. The warranty does NOT cover compatibility or functionality problems caused by the actions or technology of third parties. This warranty does NOT cover damages resulting from improper use of the device (including the use of incompatible accessories such as chargers, storage devices, etc.), unauthorized modifications to the device, negligence, any environmental or natural disasters, or loss or theft. This warranty does NOT cover water damage.

Devices that are covered will be repaired or replaced at the discretion of Spytec GPS. Devices

requiring replacement will be fulfilled with a new or refurbished unit, or a similar unit if the original unit

is no longer available.

To take advantage of our warranty, go to http://www.spytec.com/pages/returns and review our

Returns Policy. If your device meets the above guidelines as well as the guidelines on our website,

please click the button to proceed to the Return Authorization Form. In the event that our online

guidelines change, this warranty will supersede any newer changes. Once you have filled out the

Return Merchant Authorization Form, please wait for instructions.