The Atlas Mini Tracker is ideal for uses that require small size. It is ultraportable, giving you the flexibility to utilize the tracker almost anywhere.

This manual will help you get started. Welcome to Hapn.

What's in the box

• 5-pin charger
• Tracker

Step 1 - Locate your IMEI

Locate the International Mobile Equipment Identity (IMEI) number on the bottom of your tracker. The number is 15 characters long. You will need to enter it to set up your account.

Step 2 - Activate your tracker

1. From your computer or smartphone, go to: checkout.gethapn.com 
2. Follow the activation steps. Tip: Keep your tracker IMEI handy.
3. Login to the tracking app by:
   1. Going to app.gethapn.com from your computer
   2. Going to our website, gethapn.com and clicking “Login”
   3. Downloading our mobile apps:
      1. Download Hapn for iOS
      2. Download Hapn for Android
4. Once you’re logged into your tracking applications, you’ll need to make sure your tracker is connected by following the steps below.

Step 3 - Charging

1. Plug in wall charger, then connect charger to micro tracker.
2. Power LED will flash red while charging, and will turn solid white when fully charged.
3. Charge for at least 8 hours, or until the LED turns solid white.
4. Disconnect from charged. The LED will go out.

Step 4 - Placement of the tracker

• The Atlas Mini tracker needs to have as much access to the open sky as possible to retain its connection to the GPS satellites.
• Tracker cannot be surrounded by metal since it will block GPS signals. DO NOT hide the Micro in metal enclosures. DO NOT place it in the middle of the undercarriage, the engine compartment, wheel wells, metal bumpers, the trunk, glove compartment, or in any closed/lidded compartment. The best position for the device within a vehicle is under the driver or passenger seat.
  
  

Important Facts

• Standard programming for the Atlas Mini GPS tracker is to update every 3 hours when not moving and once a minute when moving.
• The more frequently the device is set to update, the faster the battery will be depleted. For example, 1-minute updates with an hour of movement per day will result in approximately 12.5 days of battery life, while 1-minute updates with 4 hours of movement per day will result in approximately 4 days of battery life.
• When the device is on, the green LED will flash once every 3 seconds.
• When powering off, the red LED will remain on for up to 2 minutes, then power down.

FAQs

Question

My device's location isn't showing on the map.

Answer

Make sure the green light is blinking slowly and take it out for a drive that lasts at least 10 minutes.

Question

My tracker says it's pinging, but is showing the wrong location.

Answer

This means the device has not yet locked onto a GPS signal. Take it outside for a 10-minute walk or drive, and its location should update.

Question

What should I do if my device is still not updating after troubleshooting?

Answer

Verify that the green light is blinking slowly and the device is
properly positioned. If the problem persists, email support@gethapn.com

Specifications

Help

Thank you for purchasing a Spytec GPS product. We appreciate your business and strive to make your experience the best possible. If you have any issues with your product, contact us at the following addresses:

Email tech support questions and/or billing questions to: support@gethapn.com

Log into your tracker at: app.gethapn.com

To download the IOS app go to: store.apple.com/hapn

To download the Android app go to: store.google.com/hapn

Warranty

The Spytec GPS 6-month hardware warranty covers products purchased online or from an authorized retailer. Products under warranty qualify for an exchange with a valid receipt and an active subscription and is non-transferable. The warranty does NOT cover compatibility or functionality problems caused by the actions or technology of third parties. This warranty does NOT cover damages resulting from improper use of the device (including the use of incompatible accessories such as chargers, storage devices, etc.), unauthorized modifications to the device, negligence, any environmental or natural disasters, or loss or theft. This warranty does NOT cover water damage.

Devices that are covered will be repaired or replaced at the discretion of Spytec GPS. Devices

requiring replacement will be fulfilled with a new or refurbished unit, or a similar unit if the original unit

is no longer available.

To take advantage of our warranty, go to http://www.spytec.com/pages/returns and review our

Returns Policy. If your device meets the above guidelines as well as the guidelines on our website,

please click the button to proceed to the Return Authorization Form. In the event that our online

guidelines change, this warranty will supersede any newer changes. Once you have filled out the

Return Merchant Authorization Form, please wait for instructions.